Superlite Steel
Wire reinforced material. For low stress conditions. For seal off water, steam, air and various alkaline chemicals.
Specification Compliance No standard exist for wire reinforced sheets
We can supply both side graphite sheet, anti stick and anti corrosion on request.
Properties Applicable for 1.5mmthick material as per test method | IS 2712 : 1998 |
Density g/cm3 | 1.8 – 2.2 |
Tensile Strength kg/cm2 | ≥70.0 |
Compressibility % | 6 – 14 |
Recovery % | ≥40.0 |
Stress Relaxation N/mm2 | -------- |
Ignition Loss % | ≤24.0 |
Fluid Absorption | --------- |
Water | --------- |
Mass Increase % | --------- |
In ASTM Oil No.3 | --------- |
Thickness Increase % | --------- |
Mass Increase % | --------- |
In Fuel B | --------- |
Thickness Increase % | --------- |
Mass Increase % | --------- |
Sulphuric Acid (65%) | --------- |
Thickness Increase % | --------- |
Max. Operation Temperature ºC | 400 |
Max. Operation Presuure Kg/ Cm2 | 40 |
![]() |
Superlite Jointings Pvt. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |